Odenthal Briggs LO206 EZ Set 8 Degree Mount and Hardware
Odenthal
$265.00
(No reviews yet)
Write a Review
Odenthal
Odenthal Briggs LO206 EZ Set 8 Degree Mount and Hardware
To determine correct clamp size, use a caliper:
1. Measure frame rail diameter
2. Measure distance outside to outside where motor will go
3. Subtract total distance from rail diameter
Example: 122mm - 30mm = 92mm
Choose Clamp: 30mm x 92mm
1. Measure frame rail diameter
2. Measure distance outside to outside where motor will go
3. Subtract total distance from rail diameter
Example: 122mm - 30mm = 92mm
Choose Clamp: 30mm x 92mm
Odenthal EZ Set Slider Engine Mount for Briggs 206 - 8 Degree
The Odenthal EZ Set Slider Engine Mount is highly recommended by Briggs & Stratton and Franklin Motorsports!
A streamlined, sleek design with a black anodize finish will look good on any chassis. Along with features that adapt for any chassis.
Features
- Multiple holes on upper plate to offset engine
- Includes base plate with slider mechanism that makes chain adjustments a breeze
- Top plate (Upper Mount) at 8 Degrees
- CNC Machined from high-quality billet aluminum and anodized black
- All mounts come with hardware
Includes
- Odenthal EZ Set 8 Degree Upper Mount
- Odenthal EZ Set Base Plate
- 4 - 10mm Threaded Bolts
- 2 - 10mm Washers
- 4 - 6mm Threaded Motor Mount Studs
- 4 - 6mm Lock Nuts
Fits Most of these Engines:
- Briggs
- Clones
- Honda
- Tillotson
Clamp Size
The Odenthal Mounts are available with different size standard motor mount clamps. To determine which size clamp is needed, use this procedure using a caliper measuring tool:
- Measure the frame rail diameter. This will either be: 28mm, 30mm, or 32mm
- Where the motor mount will go, measure the distance between the 2 rails - outside to outside. (Example: 124mm)
- Subtract the Distance from the rail diameter. (Example: 122mm - 30mm = 92mm)
- The clamp size needed in this example is: 30mm x 92mm
